The Additive Manufacturing Lab is located in MD264, and is The Cube's primary hub. It is supported by the EUS and the Department of Mechanical Engineering, and is run by some of the coolest people on earth.

ORDER FORM

Please ensure the design you submit is a solid .STL mesh. Also verify that it fits within the build volume of the printer you want to use. If your design file doesn't satisfy these criteria, a technician will get in touch with you, but ultimately, your order may be canceled altogether.

I - PERSONAL INFORMATION

II - PRINTER/MATERIAL SELECTION

For material data sheets, click on the material name.
For printer information, refer to the equipment section.

3D Printer Material Tensile Strength [MPa] Cost / cm3 * Queue [days]
Mark One Nylon 56.0 $0.54 None
Mark One CFF - Carbon Fiber 700.0 $5.61 None
MakerBot Z18 PLA 48.0 $0.26 1
Zortrax M200 Z-ABS 38.0 $0.20 None
Zortrax M200 Z-ULTRAT 42.0 $0.24 None
Zortrax M200 Z-HIPS 34.3 $0.40 None
Zortrax M200 Z-PETG 50.0 $0.27 None
Zortrax M200 Z-GLASS 76.5 $0.24 None
Mark One CFF - Kevlar 610.0 $4.02 None
Mark One CFF - Fiberglass 590.0 $3.35 None
Ultimaker 2 Extended + Ultimaker PLA 38.0 $0.24 7
Ultimaker 2 Extended + Ultimaker ABS 44.0 $0.24 7
Ultimaker 2 Extended + Ultimaker CPE 50.0 $0.31 7
Form2 FormLabs standard resin 65.0 $0.83 4
Form2 FormLabs flexible resin 8.5 $1.18 4
Form2 FormLabs castable resin 11.6 $1.33 4
Form2 FormLabs tough resin 55.7 $1.15 4

* Taxes not included

III - FILE UPLOAD

Upload your design file here, in .stl format.
If your order includes multiple files, you may submit as a .zip format.
If your file is larger than 100MB, please contact us.

DRAG OR CLICK TO UPLOAD (.STL or .ZIP)


Anything you want to tell the technician about your project or preferences?
This is a good place to mention color preference, deadlines, etc...

IV - FINALIZE ORDER

Quotation: Once you submit your order, a technician will inspect your design file and evaluate the print cost. If there are no issues with your part, you'll get an e-mail notifying you of the price within 48 hours, at which point you can either accept or refuse to go through with the order. If you have any questions, feel free to contact us. The cost is evaluated based on the volume of material used, number of individual builds required, and hours of print time.
Payment & Pickup: Once your order is complete, you will receive an e-mail notifying you that it's ready for pick-up from CopiEUS, located on the ground floor of the McConnel Engineering Building. You may pay by Cash/Credit/Debit. Unfortunately, we do not yet accept FOAPAL as a form of payment - researchers will need to file a reimbursement request through their department.


If your file is large, be patient, please don't submit twice.
Maximum file size: 100MB.

The IEEE McNaughton Center joined forces with the Cube in early 2016, and is located in MC543.

ORDER FORM

Please ensure the design you submit is a solid .STL mesh. Also verify that it fits within the build volume of the printer you want to use. If your design file doesn't satisfy these criteria, a technician will get in touch with you, but ultimately, your order may be canceled altogether.

I - PERSONAL INFORMATION

II - PRINTER/MATERIAL SELECTION

For material data sheets, click on the material name.
For printer information, refer to the equipment section.

3D Printer Material Tensile Strength [MPa] Cost / cm3 * Queue [days]
MakerBot Replicator 2 PLA 48.0 $0.17 None

* Taxes not included

III - FILE UPLOAD

Upload your design file here, in .stl format.
If your order includes multiple files, you may submit as a .zip format.
If your file is larger than 100MB, please contact us.

DRAG OR CLICK TO UPLOAD (.STL or .ZIP)


Anything you want to tell the technician about your project or preferences?
This is a good place to mention color preference, deadlines, etc...

IV - FINALIZE ORDER

Quotation: Once you submit your order, a technician will inspect your design file and evaluate the print cost. If there are no issues with your part, you'll get an e-mail notifying you of the price within 48 hours, at which point you can either accept or refuse to go through with the order. If you have any questions, feel free to contact us. The cost is evaluated based on the volume of material used, number of individual builds required, and hours of print time.
Payment & Pickup: Once your order is complete, you will receive an e-mail notifying you that it's ready for pick-up from CopiEUS, located on the ground floor of the McConnel Engineering Building. You may pay by Cash/Credit/Debit. Unfortunately, we do not yet accept FOAPAL as a form of payment - researchers will need to file a reimbursement request through their department.


If your file is large, be patient, please don't submit twice.
Maximum file size: 100MB.